303® Touchless Sealant 473ml
- Provides superior water beading
- Protects against paint fading
- Lasts up to 2x longer than traditional wax!
- Simply spray on, and rinse!
- Also great for use on windshields and wheels!
- 473ml bottle
Have you had trouble finding time to fully wax your car? 303® Touchless Sealant will save you hours! This Si02 formula is a completely TOUCHLESS quicker alternative to waxing your vehicle. Simply spray on, and rinse off – it’s that easy! It only takes minutes to get that same water beading protection you get from a full wax, saving you hours spent in the garage. It’s also great for those looking to prolong the time in between waxes, or ceramic coatings. Safe for clear coat, gel coat, fiberglass, plastics, windshields and wheels too!
Wash your car out of direct sunlight while surface is cool. While surface is still wet and out of direct sunlight, spray a small amount of product evenly across surface, treating one section of vehicle at a time. Only a light mist of product is needed. Immediately rinse section off. You will see water beading on surface, meaning it is now protected. Repeat steps on all sections of vehicle, and then dry thoroughly with a waffle weave drying towel or microfiber towel.
303 Touchless Sealant is safe to use on a variety of surfaces, such as:
This product can be applied to all vehicle exterior surfaces. It is safe and effective on;
- Clear coat
- Hard plexiglass
- And more!
If I experience water spots or streaking after using 303 Touchless Sealant, How do I remove?
Water spots and streaks can occur if the product is used on a hot surface, so make sure your vehicle is cool, wet and out of direct sunlight when applying this product. If you experience spots or streaks due to using it on a hot surface, you will need to rinse the surface again, and then also use a microfiber towel to buff these off.
Spots and streaks can also occur if too much product is sprayed on, and not rinsed off thoroughly or quickly after applying. If spots occur due to this reason, they can easily be removed simply by rinsing surface off again.
Also, make sure you dry your vehicle like you normally would (drying towel, etc.) after applying product and rinsing off. Letting the vehicle air dry can also cause water spots to form.
Can 303 Touchless Sealant be used as a layering product?
Yes, it can be. This product can be used on top of other paint protection products or as additional layers on top of itself. In general, we recommend using the longest lasting product as the base coat when layering. The layers on top of your base coat will only last as long as it does.
Can 303 Touchless sealant be used on top of automotive wax?
Yes, so long as the surface is clean, wet, and cool to the touch when applied.
Is 303 Touchless Sealant a ceramic coating?
No, this product contains ceramic coating properties, but is not exclusively ceramic. 303 Touchless Sealant has ceramic properties, but is much easier to apply. Ceramic Coatings last longer, but require much more prep and are more expensive.
What is the difference between 303 Touchless Sealant and Carnauba wax?
Durability. Carnauba Wax products tend to last 3 months or less, our product lasts up to 6 months. Our product is not a wax – it is a synthetic sealant, whereas Carnauba is a natural product.
Can 303 Touchless Sealant be used as a drying aid?
Yes. This product can be used after every wash if desired, but the product must still be water activated (rinsed off first) to function as designed.
Is 303 Touchless Sealant safe to use on a marine gel coat? Is it marine safe?
Yes, it is safe and effective on gel coat and fiberglass. This product is also Marine safe.
Is 303 Touchless Sealant safe to use on single stage paint?
Yes, it will not damage painted surfaces.