303® Outdoor Fabric Guard

Part #: 30605 | 473ml
Part #: 30606 | 946ml
Part #: 30607 | 3.78L

  • Strengthens and restores water repellency
  • Greatly increases stain resistance
  • Maintains colorfastness
  • Keeps fabrics soft and breathable
  • Safe for synthetic and natural fibers

303® Fabric Guard keeps fabrics fresh, soft, colorful and breathable…all while adding a powerful coating to repel water and prevent the most serious of stains. Use it to keep rugs clean, leather interiors fresh and covers blemish-free. You can even spray it on your convertible top’s seams to prevent wicking. When applied to clean and dry fabrics, 303® Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.

Usage Directions:

Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.

NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured. CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric. COVERAGE: 40-75 sq. ft. (30 x 60cm) depending on material and application method.​

Example Use Cases

Patio Cushion

  • Untreated: Cushions are stained and water soaks into the fabric..
  • Treated with 303 Fabric Guard: Water and soil repel from the fabric, prolonging its life.

Umbrella

  • Untreated: The umbrella is stained from outdoor elements and rain.
  • Treated with 303 Fabric Guard: Water and soil repel from the fabric and it is protected from outdoor elements.

WHAT IS 303 ® FABRIC GUARD™?

303® Fabric Guard is the only product recommended by and for Sunbrella®, as well as other fabric manufacturers to restore lost water and stain repellency. It offers unbeatable protection against soiling, water-based AND oil-based stains, and is safe enough to use on the most delicate of fabrics.

WHAT SURFACES CAN 303 ® FABRIC GUARD BE USED ON?

303® Fabric Guard can be used on all types of fabrics, including natural fibers & synthetics. Great for use on your outdoor pillows and cushions, fabric awnings or canopies, umbrellas, Bimini boat tops, as well as fabric convertible tops and more!

HOW DO I USE 303® FABRIC GUARD?

Use only on newly, cleaned, dry fabrics. For best results, treat fabrics in warm weather, of at least 70 degrees or warmer. In a well-ventilated area, apply 303® Fabric Guard on fabric until damp, overlapping in a crisscross pattern. Do not saturate. Let dry for 6-12 hours in a clean, dry environment before using or storing.